Showing posts with label voltage. Show all posts
Showing posts with label voltage. Show all posts

Monday, 16 September 2013

DIY RC Light Controller update

It has been a while since be blogged about our Light controller. In the meantime we have equipped more than ten cars with our custom electronics.

In this post we describe the changes we did along the way to the electronics and the firmware.

Saturday, 24 August 2013

Tamiya TEU-104BK mod for LiPo cut-off

Many Tamiya kits available on sale today still come with the TEU-104BK ESC. This ESC is perfectly fine for running brushed motors, but does not contain a BEC and its low voltage cut-off is too low for LiPo batteries.

The missing BEC is easily dealt with: either use "high voltage" compatible servo and receiver, or a cheap external BEC.

Fortunately it is also easy to modify the ESC to have a LiPo compatible voltage cut-off -- assuming you are able to solder a tiny surface-mount resistor.

Thursday, 7 March 2013

RC electronics Part 5 - Drift car power consumption

In part 5 we look at the electric power consumption of a 1/10 scale 4WD drift car.

The test subject is our Tamiya TT01D. We obtained the car second hand quite a while ago. It was originally an Expert Built set but has been substantially modified by the previous owner. It has the obligatory aluminium propeller shaft, a carbon fiber upper deck, a front one-way differential, sway bars, and a HobbyWing EZRun 60A brushless system with a 5.5T motor. The tires are well-worn HPI T-Drift. A 4600mAh 2S 30C LiPo provided energy for the car.

Monday, 4 March 2013

RC electronics Part 4 - Full metal scale Land Rover

The LANE Boys residence currently hosts a very special scale truck for light installation: a custom built full metal Land Rover Series 2 SWB. A good opportunity to see how much energy is needed to run such a RC car.

20130222-2049-08

Thursday, 28 February 2013

RC electronics Part 2 - Battery charging

The popular four-button-chargers support charging of different battery types. This article examines the different charging strategies applied for NiMH and LiPo batteries.

1-charger-battery-sensor

Wednesday, 20 February 2013

RC electronics Part 1 - Tenth scale 4WD Buggy power consumption

When it comes to RC electronics there is not a lot of technical information available. Not many RC enthusiasts are experts in electronics and the manufacturers only provide very few data-points for their products.

Recently I got the opportunity to acquire a second-hand Eagle Tree Systems eLogger. This device can measure battery voltage, current draw, motor RPM, temperature and throttle input while you are driving your vehicle.

My first target was our 1/10 scale buggy. A Tamiya DB01 Durga: belt driven 4WD, running a sensored 10.5T Turnigy TrackStar motor with a 60A Hobbyking X-Car ESC. The buggy is geared with a 23T pinion on the 97T spur, giving a final drive ratio (FDR) of 8.13. Power was supplied by a LPR 2S LiPo rated 4600mAh 30C.